MPX is the reflection of 35 years of technological advancement. Combing two worlds, infrared and convectional heating system, its compact size can still be used for commercial grade applications as well as applications requiring limited space.
Heat from air and radiant energy resulting in the highest efficiency heater, the MPX. Equipped a larger radiation disk and improves combustion efficiency by 13% and is able to provide more heat further away compared to the Daystar.
Duel Heating System – with its advanced technology, uses both Infrared and convectional heating to offer the highest efficiency heating and because of its compact size and portability can still be used commercially as well as areas requiring limited space.
High/Low Output Control – has an output control that enables its user to choose between a high or low output thus making it very economical.
Longer Operational Time – is able to operate continuously for over 15 hours with low speed combustion which enables it to operate all night without refueling.
Quiet Operation – efficient burner allows it to operate quietly with a noise level of about 59dB even at high setting, still lower than typical forced-air heaters’ noise level at about 75dB or more.
Adjustable Vertical Angle
The vertical angle of the radiation disk is adjustable up to 45°
~Body Shop & Garage
~Factory, Plant, Workshop
~Drying of Paint and Adhesives
~Asphalt and Concrete Preparation
|Heat Output||High: 62,500 BTU/Hr, Low: 55,500 BTU|
|Fuel||#1 Diesel or Kerosene|
|Tank Capacity||6.6 Gallons|
|Fuel Consumption||High: 0.48 gallons/Hr, Low: 0.42 gallons/Hr|
|Continuous Operating Time||High: 13.7 hours, Low: 15.7 hours|
|Power Source||120V 60Hz|
|Power Consumption||When Igniting: 100W, When Burning: 120W|
|Safety Device||Flame Monitor / Tip-Over Switch / Electrical System Protection / Overheat Protection|
|Adjustable Disk Angle||Tilts upward 45°|
|Dimensions (HxWxL)||28.4 x 20.5 x 26.6 (inches)|
|Dry Weight||70.5 Lbs|
NEED MORE INFORMATION? Click our downloads.
To prevent fire or damage to combustible floor surfaces, always use a “Heat Shield Mat” when operating VAL6 heaters.
Showing 1–20 of 48 results