EPX Radiant Heater


EPX is the VAL6 Series’ most powerful, yet efficient model ever. With the enlarged combustion chamber, 20% larger radiation disk and improved atomization, the coexistence of power and economy is now possible.

EPX features a state of the art High/Low output control that enables its user to choose between a high or low output setting, thus making it very economical.

EPX also boasts an Advanced Monitoring System that includes automatic shutdown. In the event that the main body reaches above normal temperatures or the system detects over voltage conditions, the heater will automatically shutdown to prevent malfunction of main components.

Advantages    EPX Radiation Disk

LARGER RADIATION DISK – Compared to our regular VAL6 series, the radiation disk is 20% larger. Because of this, the EPX is able to radiate the infrared heat to objects further and wider away.

HIGH/LOW OUTPUT CONTROL – The EPX has an output control that enables its user to choose between a high or low output thus making it very economical.

LONG OPERATIONAL TIME – With a 15 gallon tank, the EPX is able to operate continuously for 20 hrs on the low output setting and 15 hrs on the high output setting. This enables it to operate all night long without refueling.

BUILT IN HEATER FOR FUEL LINE – As ambient temperature decreases, viscosity increases, to counterbalance this effect, a heater is built into the fuel line to keep the fuel moving smoothly.

BUILT IN THERMOSTAT – The surrounding temperature can be maintained by the built in thermostat. An external thermostat can also be attached via a connector to control temperatures that are a distance away.

ADVANCED MONITORING SYSTEM – Color indication lamps are equipped in the main control panel. Not only does this make the mode of operation available, but prompt troubleshooting is now possible by attaining precise information via various safety devices.

EPX Safety Features 2

Safety Features

  • PREVENTION OF OVERHEATING:  To prevent malfunction, the heater has an automatic shutdown system when main body reaches temperatures above normal level.
  • TIP-OVER PROTECTION:  Heater will automatically shut off when heater falls or receives a strong impact.
  • OVER VOLTAGE DETECTION:  To prevent malfunction of main components, heater will automatically shut down when it detects over voltage conditions.
  • FLAME MONITOR:  The Flame monitor will shut the heater off if it detects low flame or no flame.
  • AFTER POWER OUTAGE: Prevention of automatic restart after a power outage prevents fire or undetectable accidents when the power is restored.

Optional Accessories

val mat

Heat Shield Mat

Val-Mat Heat Shield Mat

To prevent fire or damage to combustible floor surfaces, always use a “Heat Shield Mat” when operating VAL6 heaters.

NEED MORE INFORMATION?  Click our downloads.


EPX Parts 

800W Extreme Inverter

800W Extreme Inverter

Add to cart
EPX-1-03 – Conical Housing Assembly

EPX-1-03 | Conical Housing Assembly

Add to cart
EPX-1-04 – Burner Fitting Piece

EPX-1-04 | Burner Fitting Piece

Add to cart
EPX-1-06 – Conical Insulator

EPX-1-06 | Conical Insulator

Add to cart
EPX-1-07 – Radiation Disk

EPX-1-07 | Radiation Disk

Add to cart
EPX-1-10 - Protector Bracket - Left

EPX-1-10 | Protector Bracket – Left

Add to cart
EPX-1-11 - Protector Bracket - Right

EPX-1-11 | Protector Bracket – Right

Add to cart
agheaters.com logo

EPX-1-12 | Protector Assembly

Add to cart
EPX-2-01 – Fuel Outlet Line

EPX-2-01 | Fuel Outlet Line

Read more
KSL-B-04 – .85G Fuel Nozzle

EPX-2-06A, KSL-B-04A | .75G Fuel Nozzle

Add to cart
EPX-2-10 – Burner Gasket

EPX-2-10 | Burner Gasket

Add to cart
EPX-2-12 – Power Cable

EPX-2-12 | Power Cable

Add to cart
EPX-2-17, JA-T-17 - Fuel Hose

EPX-2-17, JA-T-17 | Fuel Hose

Add to cart
EPX-2-22, MPX-2-30 – Flame Monitor

EPX-2-22, MPX-2-30 | Flame Monitor

Add to cart
EPX-2-23 – Fan Motor

EPX-2-23 | Fan Motor

Add to cart
EPX-2-27 – Fuel Pump

EPX-2-27 | Fuel Pump

Add to cart
EPX-2-27 – Fuel Pump

EPX-2-27H | Fuel Pump with Air Vent Valve

Add to cart
EPX-2-33 – Burner Control Circuit Board

EPX-2-33 | Burner Control Circuit Board

Add to cart
agheaters.com logo

EPX-2-33H | Burner Control Circuit Board

Read more
EPX-2-37 – Overheat Sensor

EPX-2-37 | Overheat Sensor

Add to cart
EPX-2-38 – Overheat Sensor Cable

EPX-2-38 | Overheat Sensor Cable

Add to cart
EPX-2-45 – Temperature Sensor

EPX-2-45 | Temperature Sensor

Add to cart
EPX-2-46 – Internal Thermostat Cable

EPX-2-46 | Internal Thermostat Cable

Add to cart
EPX-2-46 – Internal Thermostat Cable

EPX-2-47 | Operation Switch Cable

Add to cart
EPX-2-48 – Change Over Switch

EPX-2-48 | Change Over Switch

Add to cart
EPX-2-49 – Operation Switch

EPX-2-49 | Operation Switch

Add to cart
EPX-2-51 – External Thermostat Connector

EPX-2-51 | External Thermostat Connector

Add to cart
EPX-2-54 – Burner Cover

EPX-2-54 | Burner Cover

Add to cart
EPX-3-05 – Strainer Heater

EPX-3-05 | Strainer Heater

Add to cart
EPX-3-07 - Strainer Heater Relay Cable

EPX-3-07 | Strainer Heater Relay Cable

Add to cart
EPX-3-14 – Fuel Gauge

EPX-3-14 | Fuel Gauge

Add to cart
EPX-3-15, MPX-3-19 – Fuel Tank Cap

EPX-3-15, MPX-3-19 | Fuel Tank Cap

Add to cart