MPX is the reflection of 35 years of technological advancement. Combing two worlds, infrared and convectional heating system, its compact size can still be used for commercial grade applications as well as applications requiring limited space.
Heat from air and radiant energy resulting in the highest efficiency heater, the MPX. Equipped a larger radiation disk and improves combustion efficiency by 13% and is able to provide more heat further away compared to the Daystar.
Duel Heating System – with its advanced technology, uses both Infrared and convectional heating to offer the highest efficiency heating and because of its compact size and portability can still be used commercially as well as areas requiring limited space.
High/Low Output Control – has an output control that enables its user to choose between a high or low output thus making it very economical.
Longer Operational Time – is able to operate continuously for over 15 hours with low speed combustion which enables it to operate all night without refueling.
Quiet Operation – efficient burner allows it to operate quietly with a noise level of about 59dB even at high setting, still lower than typical forced-air heaters’ noise level at about 75dB or more.
Adjustable Vertical Angle
The vertical angle of the radiation disk is adjustable up to 45°
400W Extreme Inverter The 400W Extreme inverter plugs into your auto accessory outlet converting 12V DC vehicle power to AC household power. Makes your VAL6 heaters even more portable with one of these. SKU #59846
The fuel nozzle is used to create a fine mist of fuel for perfect combustion. Same as: DS-B-05A For Daystar Models 2006 & Newer with any of the following letters in the serial number: 01N-02, J, I, H, G, F, E, D, C, B, A, Z, Y MPX-2-5 for MPX Model 0.40gph 80° AH VAL6 is a series of heaters. It is…
Step Down Transformer for VAL6 Model Daystar's made from 2013 with serial number 01C- till now or with any of the following letters in the serial number: C, B, A, Z, Y MPX Models - Part #MPX-2-20 VAL6 is a series of heaters. It is not the model name. SKU #53315A
Same as: DS-R-11B for Daystar Models from 2010 SN 01F- till now with any of the following letters in the serial number: F, E. D, C, B, A, Z, Y MPX-1-13 for MPX Models VAL6 is a series of heaters. It is not your model name. Part #1-11B SKU #53111B
Daystar Models made after 2009 SN 01G-02 with any of the following letters in the serial number: G, E, F, D, C, B, A, Z, Y. VAL6 is a series of heaters. It is not the model name. Same as: MPX-1-08 for MPX Models, G-1-17 for GP5 Models SKU #53116A
The filter is the first line of defense for the heater’s intake. This filter can be used on the following VAL6 Models: DAYSTAR (DS-T-06) MPX (MPX-3-17) PK MODELS VAL6 is a series of heaters. It is not the model name. Approximate Size: 1.25" SKU #53206
The burner cone is a protective cylinder through which the nozzle and electrodes protrude. Same as: KBE5S & KBE5L Models (KSL-B-01) EPX Models (EPX-2-09) MPX Models (MPX-2-02) VAL6 is a series of heaters. It is not the model name. Part ID #KSL-B-01 SKU #52301
Insulator between the burn chamber and the electrical components. Same as: KBE5S, KBE5L & KBE5L 2-Step (KSL-B-03) EPX Models (EPX-2-07) MPX Models (MPX-2-03) VAL6 is a series of heaters. It is not the model name. Part #KSL-B-03 SKU #52303
Step Down Transformer for Most VAL6 Models. The transformer reduces voltage by which alternating current of one voltage is changed to another voltage. Same As: KSL-B-24 - KBE5S & KBE5L DS-B-15 - Daystar EPX-2-36 - EPX NA-B-12 - Hotgun VAL6 is a series of heaters. It is not your model name. SKU #52324
Also referred to as a circuit board Only 2 lights (1-red & 1-green) KBE5S made from 2012/2013 01C-01xxxx till present or with any of these letters in the serial number: C, B, A, Z, Y KBE5L 2-Step made from 2012/13 with serial number 01D-03xxxx till present or with any of these letters in the serial number: D, C, B, A,…
For changing the fuel nozzles on all VAL6 models including the KBE5S, KBE5L, MPX, Daystar, EPX and JA models. This nozzle wrench has been specifically designed for changing the fuel nozzles on the VAL6 heaters. Makes changing nozzles easy! Same as: KSL-B-38-2 (KBE5S & KBE5L) EPX-3-29 (EPX) JA-B-75 (JA) SKU #52338-2