KBE5S state of the art combustion chamber enables virtually 100% fuel to energy conversion. This translates to clean, odorless, smokeless operation and, more importantly, fuel savings with the KBE5S.
Impervious to nature’s elements (wind, rain, and snow), it’s able to transfer infrared heat directly to the object without any loss of heat or air movement.
Safety features include a tip over sensor and an over voltage detector.
Advantages
RADIANT HEAT – Heat penetrates evenly like heat from sunlight.
OUTDOOR USE – VAL6 is not affected by wind, unlike forced air heaters that suffer from heat loss in the ambient air.
HEAT TRANSFER – VAL6 generates infrared heat directly to the object without any air movement creating a dust-free comfortable environment.
ODORLESS – A clean combustion system produces no odor or smoke while running.
ENERGY SAVINGS – VAL6’s state of the art combustion chamber enables virtually 100% fuel to energy conversion.
Radiant heat travels in a straight line, unlike hot air, its unaffected by wind by wind or cold ambient air. Since infrared heat can penetrate into the object, the targeted surface and object are warmed and/dried in a uniquely different way from any convectional heater which utilizes heated air.
KBE5S Specification Chart
KBE5S | Specifications |
---|---|
Heat Output | 111,000 BTU/Hr |
Nozzle | 0.85 gal/hr |
Fuel | #1 Diesel or Kerosene |
Tank Capacity | 9 Gallons |
Power Source | 120V 60Hz |
Power Consumption | 100W |
Safety Device | Flame Monitor / 3A Fuse / Tip-Over Switch |
Adjustable Disk Angle | Tilts upward 20° |
Dimensions (HxWxL) | 36.1 x 25.8 x 27.7 (inches) |
Dry Weight | 83.8 Lbs |
Optional Accessories
To prevent fire or damage to combustible floor surfaces, always use a “Heat Shield Mat” when operating VAL6 heaters.
Under cold conditions, the urgency to warm up with your Val6 radiant space heater can sometimes over-ride caution. The preventative Safe-T-Halo is highly regarded as a common sense safety complement option. Safe-T-Halo assembly includes mounting rails, replacement bolts and special design Halo and also includes self-store slots so Halo can be in upright-store position when moving through doorways or in off-season. * Model in picture may vary.
NEED MORE INFORMATION? Click our downloads.
KBE5S/KBE5L Maintenance Manual VAL6 Serial Number History
KBE5S Replacement Parts
-
- Sale!
400W Extreme Inverter
-
$69.99$65.00 - 400W Extreme Inverter The 400W Extreme inverter plugs into your auto accessory outlet converting 12V DC vehicle power to AC household power. Makes your VAL6 heaters even more portable with one of these. SKU #59846
- Add to cart
-
- Out of StockSale!
KBE5S Safe-T-Halo
-
$219.95$189.95 - KBE5S Safe-T-Halo Under cold conditions, the urgency to warm up with your Val6 radiant space heater can sometimes over-ride caution. When layered and/or insulated cover-all's are chilled-thru, the natural temptation is to position as close to the Val6 heat as possible and the over-dressed-for-the-cold person MAY not feel immediate heat because of insulated / layered clothing. This can potentially cause clothing…
- Read more
-
-
- Sale!
KSL-B-01, EPX-2-09, MPX-2-02 – Burner Cone
-
$32.99$24.18 - The burner cone is a protective cylinder through which the nozzle and electrodes protrude. Same as: KBE5S & KBE5L Models (KSL-B-01) EPX Models (EPX-2-09) MPX Models (MPX-2-02) VAL6 is a series of heaters. It is not the model name. Part ID #KSL-B-01 SKU #52301
- Add to cart
-
- Sale!
KSL-B-03, EPX-2-07, MPX-2-03 – Diffuser Gasket
-
$5.99$5.41 - Insulator between the burn chamber and the electrical components. Same as: KBE5S, KBE5L & KBE5L 2-Step (KSL-B-03) EPX Models (EPX-2-07) MPX Models (MPX-2-03) VAL6 is a series of heaters. It is not the model name. Part #KSL-B-03 SKU #52303
- Add to cart
-
- Sale!
KSL-B-07A, EPX-2-05, DS-B-07A – VAL6 Electrode
-
$29.99$26.10 - Electrodes spark and ignite the fuel. Same as: VAL6 Model Daystar (DS-B-07A) VAL6 Model KBE5S & KBE5L (KSL-B-07A) VAL6 Model 125NA Hotgun (NA-R-13) VAL6 Model EPX (EPX-2-05) VAL6 is a series of heaters. It is not your model name. SKU #52307A
- Add to cart
-
- Sale!
KSL-B-11, DS-B-16 – Flame Monitor Complete
-
$38.99$35.00 - Same as: KBE5S & KBE5L-Single Step (KSL-B-11) Daystar (DS-B-16) JA (Part #JA-B-48) VAL6 is a series of heaters. It is not your model name. SKU #52311
- Add to cart
-
- Sale!
KSL-B-12B – Fuel Pump
-
$269.99$264.06 - A magnetic pump with an air vent valve pumps and pressurizes the fuel for the ideal flame For Models KBE5S and KBE5L-Single Step Part ID #KSL-B-12B VAL6 is a series of heaters. It is not thedel name. SKU #52312B
- Add to cart
-
KSL-B-13 – Fuel Filter Complete
- $49.97
- The complete fuel filter includes the entire filter assembly which includes filter, o-ring and housing. Same as: KSL-B-13 - KBE5S & KBE5L NA-B-05 - Hotgun 21021 0003 9 VAL6 is a series of heaters. It is not the model name. SKU #52313
- Add to cart
-
- Sale!
KSL-B-17A, DS-B-18, EPX-2-41, MPX-2-19 – Fuse 3A
-
$2.09$1.99 - 3A Fuse, 250 volt fuse that fits most of our heaters. Same As: KBE5S & KBE5L (KSL-B-17A) EPX (EPX-2-41) Hotgun (NA-B-17) 2005 & Older Daystar (DS-B-18) MPX (MPX-2-19) SKU #52317A
- Add to cart
-
- Sale!
KSL-B-18A, EPX-2-40, MPX-2-18 – Fuse Holder
-
$25.99$20.05 - KSL-B-18A - For KBE5S Models 2004 and Newer EPX-2-40 MPX-2-18 VAL6 is a series of heaters. It is not the model name. SKU #52318A
- Add to cart
-
- Sale!
KSL-B-19B – Power Cable
-
$29.99$26.10 - 8" power cable 500mm For Models KBE5S & KBE5L without a high/low switch and made from 2006 to 2012 KBE5S: till 2012/2013 with SN D-05 KBE5L: till 2012/2013 with SN D-03 VAL6 is a series of heaters. It is not the model name. SKU #52319B
- Add to cart
-
- Sale!
KSL-B-19C – Power Cable
-
$28.99$26.10 - For Models KBE5S & KBE5L and made from 2012 till present KBE5S: from 2013/14 with SN C-01 KBE5L: from 2012/13 with SN D-04 VAL6 is a series of heaters. It is not your model name. SKU #52319C
- Add to cart
-
- Sale!
KSL-B-23 – Fan Motor
-
$159.99$152.00 - For Models KBE5S & KBE5L-Single Step KSL-B-23 VAL6 is a series of heaters. It is not the model name. SKU #52323
- Add to cart
-
- Sale!
KSL-B-24, DS-B-15, EPX-2-36 – Step Down Transformer
-
$35.99$33.41 - Step Down Transformer for Most VAL6 Models. The transformer reduces voltage by which alternating current of one voltage is changed to another voltage. Same As: KSL-B-24 - KBE5S & KBE5L DS-B-15 - Daystar EPX-2-36 - EPX NA-B-12 - Hotgun VAL6 is a series of heaters. It is not your model name. SKU #52324
- Add to cart
-
- Sale!
KSL-B-25B – Burner Control Circuit Board
-
$219.99$215.90 - This is the brain of the heater. All electrical parts are attached through this component. For KBE5S or KBE5L Single Step (just on/off switch) made from 2006/2007 to 2012/13 - DOES NOT HAVE OVER VOLTAGE LIGHT. Make sure #50321-204005 is printed on board you are replacing VAL6 is a series of heaters. It is not the model name. Same As:…
- Add to cart
-
- Sale!
KSL-B-25C – Burner Control Circuit Board
-
$249.99$238.25 - For KBE5S Only made from 2006 with 01J-04 serial number till 2012/2013 with 01D-05 serial number or with any of these letters in the serial number: J, I H, G, F, E, D - WITH OVER VOLTAGE LIGHT Make sure #50300-201032 is printed on board you are replacing With Over Voltage Light VAL6 is a series of heaters. It is…
- Add to cart
-
- Sale!
KSL-B-25E – Burner Control Circuit Board
-
$229.00$215.90 - Also referred to as a circuit board Only 2 lights (1-red & 1-green) KBE5S made from 2012/2013 01C-01xxxx till present or with any of these letters in the serial number: C, B, A, Z, Y KBE5L 2-Step made from 2012/13 with serial number 01D-03xxxx till present or with any of these letters in the serial number: D, C, B, A,…
- Add to cart