The newly upgraded KBE5L 2-Step is now equipped with a High and Low output control making it very economical. Also included is a Fuel pre-heater to keep fuel moving smoothly as temperature decreases.
KBE5L 2-Step state of the art combustion chamber enables virtually 100% fuel to energy conversion. This translates to clean, odorless, smokeless operation and, more importantly, fuel savings.
Impervious to nature’s elements (wind, rain, and snow), the KBE5L 2-Step is able to transfer infrared heat directly to the object without any loss of heat or air movement.
ENERGY SAVING – Selecting a low combustion can make fuel consumption lower. This means that this heater can save you operation cost. For example, in early winter if the heater operates with a low combustion, it can save 1.2 gallons a day, 24 gallons a month.
Sunlight Warmth – VAL6’s radiant heat penetrates evenly and directly into surfaces just like sunlight.
Best Choice for Outdoors – VAL6 is not affected by wind, unlike forced air heaters that suffer from heat loss in the ambient air.
Heat Transfer – Generates infrared heat directly to the object without any air movement creating a dust-free comfortable environment.
Odorless – Perfect combustion system produces no odor and no smoke while running.
Energy Savings – State of the art combustion chamber enables virtually 100% fuel to energy conversion.
Portable – This heater can be taken virtually anywhere that you need heat.
KBE5L 2-Step Specification Chart
High: 118,000 BTU/Hr, Low: 100,000 BTU/Hr
High: .90 Gal/Hr, Low: 0.75 Gal/Hr
#1 Diesel or Kerosene
In Ignition: 150W, In Operation: High: 120W
Flame Monitor / 3A Fuse / Tip-Over Switch
36.3 x 28 x 29.2 (inches)
NEW Features of the KBE5L
2-Step Output Control High and low output control is equipped. It enables its user to choose between a high or low output thus making it very economical.
As ambient temperature decreases, viscosity increases. To counterbalance this effect, a heater is built into the fuel line to keep the fuel moving smoothly.
Val-Mat Heat Shield Mat To prevent fire or damage to combustible floor surfaces, always use a “Heat Shield Mat” when operating VAL6 heaters.
KBE5L Safe-T-Halo Under cold conditions, the urgency to warm up with your Val6 radiant space heater can sometimes over-ride caution. The preventative Safe-T-Halo is highly regarded as a common sense safety complement option. Safe-T-Halo assembly includes mounting rails, replacement bolts and special design Halo and also includes self-store slots so Halo can be in upright-store position when moving through doorways or in off-season.
400W Extreme Inverter The 400W Extreme inverter plugs into your auto accessory outlet converting 12V DC vehicle power to AC household power. Makes your VAL6 heaters even more portable with one of these. SKU #59846
The fuel nozzle is used to create a fine mist of fuel for perfect combustion. The fuel nozzle needs to be replaced if it becomes clogged which is usually indicated by smoky operation. 0.75gph 60° For KBE5L with high/low switch (KSL-B-04A) EPX Models (EPX-2-06A) VAL6 is a series of heaters. It is not the model name. SKU #57206
For Models EPX (EPX-3-28) KBE5L 2-Step which has a high/low switch (KSL-B-38C) Includes: 2-Fuel Filters, .75 Fuel Nozzle, 2-O rings, Fuse VAL6 is a series of heaters. It is not the model name. SKU #57328
KBE5L Safe-T-Halo Under cold conditions, the urgency to warm up with your Val6 radiant space heater can sometimes over-ride caution. When layered and/or insulated cover-all's are chilled-thru, the natural temptation is to position as close to the Val6 heat as possible and the over-dressed-for-the-cold person MAY not feel immediate heat because of insulated / layered clothing. This can potentially cause clothing…
Insulator between the burn chamber and the electrical components. Same as: KBE5S, KBE5L & KBE5L 2-Step (KSL-B-03) EPX Models (EPX-2-07) MPX Models (MPX-2-03) VAL6 is a series of heaters. It is not the model name. Part #KSL-B-03 SKU #52303
KSL-B-04 - .85G Fuel Nozzle .85G Fuel Nozzle creates a fine mist of fuel for perfect combustion within the VAL6 heaters. For models KBE5S and KBE5L without a high/low switch. KSL-B-04 / KSL-B-4 VAL6 is a series of heaters. It is not the model name. SKU #52304
Electrodes spark and ignite the fuel. Same as: VAL6 Model Daystar (DS-B-07A) VAL6 Model KBE5S & KBE5L (KSL-B-07A) VAL6 Model 125NA Hotgun (NA-R-13) VAL6 Model EPX (EPX-2-05) VAL6 is a series of heaters. It is not your model name. SKU #52307A
A magnetic pump with an air vent valve pumps and pressurizes the fuel for the ideal flame For Models KBE5S and KBE5L-Single Step Part ID #KSL-B-12B VAL6 is a series of heaters. It is not thedel name. SKU #52312B
A magnetic pump with an air vent valve pumps and pressurizes the fuel for the ideal flame For KBE5L 2-STEP Models from 2010/2011 with serial numbers start with 01F-04 or newer VAL6 is a series of heaters. It is not the model name. Item #50330-201005 SKU# 52312C
The complete fuel filter includes the entire filter assembly which includes filter, o-ring and housing. Same as: KSL-B-13 - KBE5S & KBE5L NA-B-05 - Hotgun 21021 0003 9 VAL6 is a series of heaters. It is not the model name. SKU #52313
The filter is the first line of defense for the heater's intake. Unusually dirty fuel will "age" the fuel filter more rapidly than clean fuel. It is recommended that you replace the fuel filter, as well as the o-ring, before each heating season for best performance. Dimensions: 1-1/2" x 1" Can be used on these models: KBE5S, KBE5L, KBE5L 2-Step…
8" power cable 500mm For Models KBE5S & KBE5L without a high/low switch and made from 2006 to 2012 KBE5S: till 2012/2013 with SN D-05 KBE5L: till 2012/2013 with SN D-03 VAL6 is a series of heaters. It is not the model name. SKU #52319B
Step Down Transformer for Most VAL6 Models. The transformer reduces voltage by which alternating current of one voltage is changed to another voltage. Same As: KSL-B-24 - KBE5S & KBE5L DS-B-15 - Daystar EPX-2-36 - EPX NA-B-12 - Hotgun VAL6 is a series of heaters. It is not your model name. SKU #52324
This is the brain of the heater. All electrical parts are attached through this component. For KBE5S or KBE5L Single Step (just on/off switch) made from 2006/2007 to 2012/13 - DOES NOT HAVE OVER VOLTAGE LIGHT. Make sure #50321-204005 is printed on board you are replacing VAL6 is a series of heaters. It is not the model name. Same As:…