We're Open and Ready to Help! Shipping Parts Daily to Your Door.
The VAL6 series lineup has everything you need in a space heater. Whether you’re looking for portability, efficiency, power, or all of the above, the VAL6 series has the perfect heater for you.
Do you have a garage, shop, calving facility, working chute, or other uses (indoor or outdoor) for a portable radiant heater? For operations that need an efficient heater capable of providing effective radiant heat to a wide range of indoor/outdoor applications, we have a clean, quiet, economical, go-anywhere, diesel-fired radiant heater that makes more work sites workable, comfortable and productive. We have many sizes of the VAL6 Portable Radiant Heaters that let you enjoy your sun-room, fishing hut, duck blind, snowmobiling activities, drying of paint and adhesives, asphalt and concrete preparation and many more!
FACTS
- VAL6 Portable Radiant Heaters are the most efficient heater per BTU on the market today.
- VAL6 Portable Radiant Heaters are very effective even under conditions of snow, wind or rain.
- VAL6’s effectiveness in heating objects in target areas eliminates heat loss to ambient air.
- VAL6’s directional infrared penetrates into objects which re-radiate heat resulting in quicker drying times and better overall heat retention.
- VAL6’s penetrating infrared rays heat people quicker and more efficiently, resulting in a longer lasting, more comfortable heating effect. (Unlike conventional heaters which only heat the air).
- VAL6’s infrared heat creates a comfortable environment.
- VAL6 emits no smell or smoke while operating and has low noise levels and virtually undetectable carbon monoxide emissions.
- VAL6 costs much less to operate because it uses far less fuel than conventional heaters.
Sunlight Warmth – VAL6’s radiant heat penetrates evenly on and into surfaces just like sunlight.
Best Choice for Outdoors – VAL6’s performance is unique in the outdoors and unlike forced air heaters, which lose heat from wind and cold air.
No Air Movement / Dust Free – VAL6 generates straightforward infrared heat which is unaffected by air flow, thus creating a comfortable and dust-free environment.
Odorless – VAL6’s perfect combustion system produces no odor and no smoke while running. The exhaust gas goes upward.
MANY MODELS TO CHOOSE FROM!














Optional Accessories
To prevent fire or damage to combustible floor surfaces, always use a “Heat Shield Mat” when operating VAL6 heaters.
Safe-T-Halo
Under cold conditions, the urgency to warm up with your Val6 radiant space heater can sometimes over-ride caution. The preventative Safe-T-Halo is highly regarded as a common sense safety complement option. Safe-T-Halo assembly includes mounting rails, replacement bolts and special design Halo and also includes self-store slots so Halo can be in upright-store position when moving through doorways or in off-season. * Model in picture may vary.
HEAR WHAT OUR CUSTOMERS ARE SAYING ABOUT THE VAL6’S …..
My trusty ole’ val 6 took a tumble down the highway this week. When I rounded a curve at around 35 mph and the strap holding it broke, not sure how far it tumbled??? Loaded her back up (used a heavier strap) put fuel in her and the next morning it fired right up just as it has for the last 12 plus years!!! Hands down the best piece of equipment I have ever bought as far as toughness, durability, and reliability. Thanks Jim.
Jason Stamp
Hoof Man Inc. – Ewing, NE
We calve about 300 cows and use a VAL6 Radiant Heater to help. We’ve easily saved 30+ calves when the weather would get tough. We put the calf in front of the VAL6 and the calf is usually steaming and standing in under a half an hour. The VAL6 has paid for itself many times over. We are so happy we are buying another VAL6.
Chris M – Colon, NE
I bought an EPX and EconoDri about 4 years ago. Very happy with grain drying and use in shop.
Joe H – Wahoo, NE
VAL6 Replacement Parts
-
- Sale!
400W Extreme Inverter
-
$69.99$65.00 - 400W Extreme Inverter The 400W Extreme inverter plugs into your auto accessory outlet converting 12V DC vehicle power to AC household power. Makes your VAL6 heaters even more portable with one of these. SKU #59846
- Add to cart
-
- Out of StockSale!
DS-B-10A – Burner Gasket
-
$19.99$17.58 - Discontinued - Suggest to use a DS-R-11A instead For Daystar Models Made in 2006 to 2009 DS-B-10A VAL6 is a series of heaters. It is not your model name. SKU #53310A
- Read more
-
-
- Sale!
DS-B-10B – Burner Gasket
-
$16.99$14.33 - For Daystar Models till 2009 and up to serial numbers 01G- DS-B-10B 50319 202025 VAL6 is a series of heaters. It is not the model name. SKU #53310B
- Add to cart
-
- Sale!
DS-B-10C, MPX-2-01 – Burner Gasket
-
$11.00$10.82 - Same as: Daystar Models made 2010 & after (DS-B-10C) MPX (MPX-2-01) 50319 202028 VAL6 is a series of heaters. It is not the model name. SKU #53310C
- Add to cart
-
- Sale!
DS-B-12A – Switch Assembly
-
$23.99$22.91 - For Daystar Models 2006 SN 01J- to 2012 with any of the following letters in the serial number: J, I, H, G, F, E, D DS-B-12A 50317 102006 VAL6 is a series of heaters. It is not the model name. SKU #53312A
- Add to cart
-
- Sale!
DS-B-12B – Switch Assembly
-
$59.99$51.56 - DS-B-12B - Switch Assembly For Daystar Models 2013 SN 01C till Present with any of the following letters in the serial number: with any of the following letters in the serial number: C, B, A, Z, Y. 50317 102011 VAL6 is a series of heaters. It is not the model name. SKU #53312B
- Add to cart
-
- Sale!
DS-B-15A, MPX-2-20 – Step Down Transformer
-
$35.99$33.41 - Step Down Transformer for VAL6 Model Daystar's made from 2013 with serial number 01C- till now or with any of the following letters in the serial number: C, B, A, Z, Y MPX Models - Part #MPX-2-20 VAL6 is a series of heaters. It is not the model name. SKU #53315A
- Add to cart
-
- Sale!
DS-B-17 – Burner Control Circuit Board
-
$129.99$115.20 - For Daystar Models 2004 and Older Make sure #50317-202002 is on board you are replacing. Replacement is 50310 202012. DS-B-17 VAL6 is a series of heaters. It is not the model name SKU #53317
- Add to cart
-
- Sale!
DS-B-17A – Burner Control Circuit Board
-
$138.99$136.61 - For Daystar Models from 2005 SN 01N-01 till 2012 Make sure #50310-202012 is printed on board you are replacing. Replacement is 50310 202025. DS-B-17A VAL6 is a series of heaters. It is not the model name. SKU #53317A
- Add to cart
-
- Sale!
DS-B-17C – Burner Control Circuit Board
-
$179.99$172.73 - DAYSTAR Model made from 2013 with SN 01C- till current Same as a DS-B-17B Make sure 50317-202024 is printed on board you are replacing VAL6 is a series of heaters. It is not the model name. SKU #53317C
- Add to cart
-
- Sale!
DS-B-20 – Fan Motor
-
$199.99$193.58 - For Daystar Models DS-B-20 50317 202011 VAL6 is a series of heaters. It is not the model name. SKU #53320
- Add to cart
-
- Sale!
DS-B-21 – Ignition Transformer
-
$98.39$91.57 - For DAYSTAR Models Before 2005 with any of the following letters in the serial number: N, P, Q, R, S DS-B-21 50310 202011 VAL6 is a series of heaters. It is not the model name. SKU #53321
- Add to cart
-
- Sale!
DS-B-21A, MPX-2-10 – Ignition Transformer
-
$99.99$97.54 - Same as: DAYSTAR Models after 2006 (DS-B-21A) MPX Models (MPX-2-10) VAL6 is a series of heaters. It is not your model name. SKU #53321A
- Add to cart
-
DS-B-22 – Power Cable
- $54.42
- For Daystar Models made from 2006 to 2012. 11 ft long 50317 202005 VAL6 is a series of heaters. It is not the model name. SKU# 53322
- Add to cart
-
DS-B-22A – Power Cable
- $48.36
- For Daystar Models made from 2013, 01C- serial number till present 11 ft long 50317 202023 VAL6 is a series of heaters. It is not the model name. SKU# 53322A
- Add to cart
-
- Sale!
DS-B-24A – Fuel Pump
-
$241.49$186.53 - This fuel pump does not have an air vent. Use on Daystar Models made from 2005 SN 01N and Older (with any of the following letters in the serial number: N, P, Q, R, S) DS-B-24A 50317 202012 VAL6 is a series of heaters. It is not the model name. SKU #53324A
- Add to cart
-
- Sale!
DS-B-24B – Fuel Pump
-
$275.99$273.63 - DS-B-24B For Daystar Models made from 2005 to 2012 and that has an air vent with any of the following letters in the serial number: J, I, H, G, F, E, D 50317 202015 VAL6 is a series of heaters. It is not the model name. SKU #53324B
- Add to cart
-
- Sale!
DS-B-24C – Fuel Pump
-
$299.99$289.69 - For Daystar Models made from 2013 till present 50317 202027 VAL6 is a series of heaters. It is not the model name. SKU# 53324C
- Add to cart
-
- Sale!
DS-B-32 – Daystar .3 Repair Kit
-
$49.99$40.00 - For Older Daystar Models that use a .3G nozzle Includes Filter, Nozzle .3G, Fuse, Wrench VAL6 is a series of heaters. It is not the model name. SKU #53332
- Add to cart
-
- Sale!
DS-R-04 – Inner Cylinder
-
$218.99$206.21 - Also called an Insulator. For DAYSTAR VAL6 Models till 2009 with any of the following letters in the serial number: S, R, Q, P, N, J, I, H and making sure your cone has a cone shape at the closed end. Has a cone shape at closed end. DS-R-04 50317 201004 VAL6 is a series of heaters. It is not…
- Add to cart
-
- Sale!
DS-R-04A – Inner Cylinder
-
$229.99$203.28 - For DAYSTAR Models after 2010. Also called an Insulator. Has flat end. DS-R-04A 50317 201012 VAL6 is a series of heaters. It is not the model name. SKU #53104A
- Add to cart
-
- Sale!